These Risers allow you to clamp a stock 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1-1/8" aluminum "fatbar". Reducers lock into risers to insure no slippage between components, as well they have serrated teeth in them for maximum gripping power on handlebar. 7/8" stem clamp.
Increase your comfort and reduce back strain with these adjustable snowmobile handlebar risers. By moving your handlebars forward and into a more natural and comfortable position you will enjoy wintertime more, and look forward to being on your sled with greater frequency. 
ROX Speed FX patented Elite pivoting riser, these risers work on any machine with 7/8" bar clamps, atv's, snowmobiles, bikes. Dual roatation points allow rider to select optimum riding position. 
Easy installation. All hardware included. 
3 1/2" Rise 7/8" Stem Accepts 7/8" OR 1 1/8" Handlebar Pivots Forward or Backward to allow the rider to find the perfect handlebar position. Made in the USA
 
Additional Rox risers are available in our store. Chose from the standard 2", 3.5", 5" or the new Elite Series risers. Adjustable height risers and Rox accessories available.
Notes for Rox Snowmobile Handlebar Risers:
Caution: First determine if you have adequate cable length before installing snowmobile handlebar risers 
Amount of extra cable length varies based on make and model 
It is recommended that you consult your local dealer 
Important: After installation check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine, securely lifted and stabilized on jack stand, slowly turn handlebar from left to right, if the engine idle speed increases STOP HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables. 
Not responsible for injury or death resulting from improper installation! Thoroughly read and follow instructions.